PGYTECH DJI Mavic Air 2 / Air 2S kandekohver

Tootekood: P-16A-037

PGYTECH DJI Mavic Air 2 / Air 2S kandekohver

Tootekood: P-16A-037

PGYTECH kandekohver on disainitud DJI Mavic Air 2 / Air 2S drooni ning lisavarustuse mahutamiseks, hoiustamiseks ning transportimiseks.

Laost otsas

Küsi saadavust

Kirjeldus

The case is made of shock- and corrosion-resistant plastic, which is durable and solid. It is lined inside with EVA foam, which effectively protects its contents from damage. The suitcase provides protection at temperatures from -20 to 60 degrees, but in a short period of time, it can also stay at temperatures from -40 to 80 degrees.


 

Efficient storage

 

The suitcase has been constructed so that everything is properly secured. Inside there is space for Mavic Air 2, two batteries, DJI Smart Controller, an additional pair of propellers, an ND filter set, battery charging hub, control unit, power bank adapter, drone, and smart controller charger and cables. All of this is strictly matched to the foam pads.


 

IP67 Protection

 

This type of protection means that the suitcase has total protection against dust, and immersion in water up to 1 meter deep should not be a problem. So whatever the weather conditions, whether hail, snow or storm, the drone will be protected from harmful environmental influences.


 

Content not for everyone

 

The new type of latches effectively protects the case from opening, while being very easy to use. The reinforced stainless steel padlock is an effective form of protection against unwanted opening by third parties and it is almost impossible to cut it.


 

Thoughtful solutions

 

The case is equipped with a valve that balances the pressure. This solution prevents the pressure difference inside the case from being different from that outside. In this way, we avoid the possibility that a vacuum seal is formed inside, which will damage the contents when opening the case.

Lisainfo

Tootja

Spetsifikatsioonid

Heli:
– Kanaleid – 13
– Võimsus (6 ohm, 1 kHz, THD 1%, 1 ch driven): 210 W
– Võimsus (8 ohm, 20 Hz – 20 kHz, THD 0.05%, 2 ch driven): 150 W
– Kõlarite takistud 4 – 16 oomi
– Denon Link HD
– Audyssey MultEQ XT32
– Audyssey Dynamic EQ / Dynamic Volume
– Audyssey LFC
– Compressed Audio Restorer
– DTS:X / DTS Neural:X / DTS HD Master
– Dolby Atmos / Dolby TrueHD / Dolby Surround
– Auro 3D
– Multichannel Stereo
– Pure Direct
Ühendused:
– HDMI sisend – 8 (sh. 1 esipaneelil)
– HDMI väljund – 2
– Komponentvdeo sisend/väljund – 3/1
– Komposiitvideo sisend/väljund – 4+1/2
– RCA sisend – 7+1 Phono sisend
– Optiline sisend – 2
– Koaksiaalsisend – 2
– USB – 1 esipaneelil
– Liiniväljundid – 15.2
– Zone2 ja Zone3 liiniväljundid
– Kõrvaklapiväljund – 1
– Võrgupistik – 1 RJ45
– RS232
– 2 x 12 V Trigger out
HDMI
– HDCP2.2
– 4K Ultra HD 60Hz
– 4K upscaling
– Dolby Vision / HLG
– 4:4:4 Pure Color
– High Dynamic Range (HDR)
– HDMI läbilaskmine standby reziimis
– CEC/ARC
– Auto lipsync
– Enhanced Audio Return Channel
– DSD Audio
Võrgu formaadid:
– Toetatavad formaadid: MP3 / WMA / AAC / FLAC / ALAC / WAV
– FLAC HD 192/24
– WAV 192/24
– ALAC 192/24
– DSD 2.8MHz / 5.6MHz
– AirPlay audio streaming
– Spotify Connect / TIDAL / Deezer
– Internet radio (TuneIn)
– Denon 2016 AVR Remote App iOS, Android ja Kindle Fire seadmetele
– Ethernet, Wi-Fi 2.4GHz/5GHz ja Bluetooth
Mõõdud (LxKxS): 434 x 195 x 482 mm
Kaal: 23,3 kg

Uudiskirjaga liitumine